Maintenance Lubricants and Penetrating Fluids
Ace Glass, Inc. 30mL Hi-Lube heavy duty stirrer lubrication.
30mL container of Hi-Lube heavy duty stirrer lubricant. Lubricant is chlorofluorocarbon grease for use at speeds up to 6000 rpm with ACE standard glass assemblies. High chemical inertness is unaffected by strong acids and alkalis. Soluble in most organic solvents. Suitable for use with oxidizing gases. Has high heat resistance and is thermally stable up to 260 degrees C (500 degrees F). Non-flammable; does not carbonize on decomposition.
Ace Glass, Inc. 1oz Stir-Lube stirrer lubrication
1oz Stir-Lube stirrer lubricant is a superior, low melting, silicone based lubricant which liquefies at body temperature. Its composition allows for application of a very thin layer to a stirring shaft to increase bearing and shaft life at least three times over that of a bearing lubricated with glycerine.
World Precision Instrument Sylgard Silicone Elastomer
2-part silicone elastomer, ideal for potting and encapsulating applications
This silicone elastomer has a very low dielectric constant sealing compound, which makes it ideal for patch clamping and many other lab applications, especially in electrophysiology applications.
Electron Microscopy Sciences Lapping Vehicle Formula B Lube 16 OZ
A universal lapping vehicle compatible with both water and oil soluble compounds. This very versatile formulation allows you to change materials and compounds and still provides excellent lubrication.
Electron Microscopy Sciences Apiezon High Vacuum Grease, Type T 25 GR
Type T is designed for lubricating glass taps and for general purposes. Has a melting point of 125 degree C and has an estimated vapor pressure @ 20 degree C of 5x10-9 torr. Although type T is useful at higher temperatures, it can also be used at ambient temperatures. Temperature range: 0-120 degree C.
Electron Microscopy Sciences Santovac 5 for Ultra High Vacuum Range 500 ML
A Polymethyl Ether, designed for an ultra high vacuum range: 10-10 torr. Ultra low vapor pressure results in low ultimate pressures; there is no need for a cold trap and it is suitable for diffusion pumps. Santovac 5 may discolor with use but it will maintain its physical properties.
Electron Microscopy Sciences Thermally Conductive Adhesive ETC Bond 860 25 GR
Thermally conductive adhesive, Aluminum nitride filled, 1:1 epoxy paste, Excellent mechanical & thermal properties to 400 deg F.
Electron Microscopy Sciences Microtome Oil 50 ML
A chemically pure, high-grade lubricant used in precision instruments. Should be used periodically to lubricate cross-rollerbearings for microtomes.
Ted Pella Inc PELCO Colloidal Silver Paste, 25g
Ideal where a nonflowing paste is needed for special applications. Particle size: 0.4-1.0µm, 80% are below 1.0µm. Cures in 16-20 hours, or 30 minutes @125-150°C. Clear lacquer base. Approximate Specific Gravity 2.25g/cc3. Service temperature = 200°C. Use #16021 gold/silver thinner/extender to dilute if needed.
Biotage SPE DISKS PACIFIC BR 90MM 50BX
Pacific Oil & Grease Disk Certified for Automation. QC tested in our labs to guarantee that you receive the highest quality results when used in conjuction with the Horizon Technology Automated Extractors.